+- The Wrecking Crew Forums (https://forums.twcpilots.com)
+-- Forum: Administration (https://forums.twcpilots.com/forumdisplay.php?fid=3)
+--- Forum: Requests and Bug Reports (https://forums.twcpilots.com/forumdisplay.php?fid=5)
+--- Thread: Problems with Campaing 1941 (/showthread.php?tid=445)
Problems with Campaing 1941 - ranger01 - 01-18-2021
It is difficult to start with the explanation of the problem, but I will try:
1-By a few days it is not possible to fly inside TWC Campaign 1941 (Campaign 1940 not yet updated) because what I see on screen is "jerking" in a way that makes impossible to play.
If I remember well I was able to fly on that server after the update to version "015". I have also to say that 4 days ago, I switched from a link via HDMI to Display Port. Immediately I had troubles with black screens coming up and lasting a couple of seconds while playing. I then updated the video card driver and returned to the old link PC-Monitor, via HDMI. And then started the troubles I mentioned at the beginning:
-jerking movement
-long wait to enter the server (More than a minute)
-difficult and long wait to log out.
-difficulties and long wait to change the resolution
2- Finally, I can ply with no troubles os any sort with ALL OTHER SERVERS(TF#1 and 3, Danger Dogz etc) except TWS Campaign 1941 .
I do not know what to do. .
Any advice to help is welcome. Thanks in advance.
For info I have a processor 1- 5 fourth generation a video card Asus Geforce 1050 ti 4 GB, and 16 giga RAM