Before running off to chucks wonderful guide let me give you a down and dirty guide that will bring you up to speed on the spit and the hurricane models rotol 100 oct and 1a 100 and mkiII a spitfire
first adjust your on-screen motor controls from analog to digital this is crucial as to getting everybody on the same page
once you have done this you will see your output in percentages
below 15000 ft turn on boost cut out (gives you 110% throttle at your command)
adjust your prop for 80% rad to 100% and run the throttle where ever you need and no matter what this setting will never overheat
adjusting over 85% prop can cause over heating and heavy maneuvering at radiator settings below 75% will also cause overheating
standard settings for flight leads is 100% throttle 80 prop and 100% rad so everybody can form up ........
